Diving Bcd

Diving Bcd
Help with setting up regulators.?

Okay well im setting up my scuba diving regulators..
I'm not sure what to do.. I have all the equipment ready

I have the following..:
1st/2nd stage regulator ( bought)

and i would like to attach a pressure gauge and also a feed to my bcd and dry suit.

I remeber reading something about " hp " being for my pressure gauge and apart from that does it matter where the rest goes ?

Many thanks

Brett Court.

On the first stage of the regulator, there are multiple ports to attach various hoses. The low pressure ports are a different size than the high pressure ports. All of the low pressure should be the same size, and all of the high pressure will be the same size.

Also, on all five of our regulators (mine and my wife's), all of the high pressure ports have "HP" stamped into the metal of the first stage beside the port.

Since the ports are different size, you just need to match the connector of the hose to the proper port.

Imagine how the first stage will attach to the tank. Picture where you want the inflator hose and the pressure gauge, and attach them to the appropriate ports.

For More Diving Bcd Info Click On The Blue Links Below

Many thanks for reading our Diving Bcd article

Recent Diving Bcd deals on ebay

• Scuba Diving Bcd
• XS Scuba X5 Diving Gear Hanger Organizer
• World Scuba Diving
• Wind Storm Whistle Scuba Diving and Water Sport Safety Whistle World’s Loudest Dive Diver Snorkeling